In heavy industrial bolting operations, the reliability of a hydraulic torque wrench system depends almost entirely on the performance of its power unit. The FBP400, part of the FBP Series anti explosion electric hydraulic torque wrench pump family, is engineered to deliver stable high pressure output in demanding environments where standard pneumatic or electric pumps cannot operate safely. With a maximum working pressure of 700 bar and a 1.1 kilowatt three phase motor certified to EXDII CT4, the FBP400 is designed for oil and gas, petrochemical, power generation, mining and heavy equipment assembly applications where explosive gas atmospheres may be present.
This article reviews the core technical specifications, engineering advantages and real world use cases of the FBP400 pump, and explains why its three stage flow design and explosion proof construction make it a preferred choice for industrial bolting contractors.
Core Technical Specifications of the FBP400
The FBP400 is built around a compact frame structure with the following key parameters:
| FBP400 | |
| 700 bar | |
| 0.85 L per minute | |
| 1.7 L per minute | |
| 8.0 L per minute | |
| 1.1 kW | |
| 15 L | |
| Three phase 220V to 575V, 50 Hz or 60 Hz | |
| 50 kg | |
| 535 mm by 460 mm by 665 mm |
The 15 litre large aluminium oil tank provides sufficient hydraulic oil capacity for extended continuous operation. The aluminium construction also contributes to excellent heat dissipation, which is essential when the pump runs for long shifts on site.
One of the most important engineering features of the FBP400 is its multi stage flow delivery. Rather than outputting a single fixed flow rate, the pump automatically adjusts oil volume according to system pressure:
At low pressure stages up to 70 bar, the pump delivers as much as 8.0 L per minute. This high flow rate quickly advances the wrench piston to contact the nut, reducing idle cycle time.
At middle pressure between 70 bar and 300 bar, flow drops to 1.7 L per minute, maintaining reasonable speed during the tightening transition.
At high pressure between 300 bar and 700 bar, flow reduces to 0.85 L per minute, providing the high torque output needed for final bolt tensioning.
This automatic transition means the operator does not waste time waiting for the wrench to approach the nut, yet still receives full high pressure output when it matters most. In production environments where hundreds of bolts are tightened per shift, this efficiency gain translates directly into shorter project timelines and lower labour cost.
The FBP400 is certified to EXDII CT4, one of the most widely recognised explosion proof ratings for electric equipment in hazardous locations. This certification means the motor and the built in electronic control system with explosion proof magnetic trigger are constructed to prevent external ignition of surrounding flammable gases, vapours or dust.
For contractors working in refineries, offshore platforms, natural gas processing plants, coal mines or chemical facilities, using a non certified pump would create a serious safety hazard and may violate site safety regulations. The FBP400 removes this barrier by allowing electric hydraulic power to be used inside Zone 1 and Zone 2 hazardous areas, where previously only pneumatic pumps were permitted.
Additional safety features include the hand directional valve, which gives the operator direct manual control over wrench extension and retraction, and the advanced pressure control valve that maintains stable pressure even during long continuous operation.
Industrial bolting is not a light duty task. The FBP400 is engineered for sustained use:
The large aluminium oil tank with optimized cooling system keeps the pump body temperature under control even during extreme working conditions.
The pressure control valve is designed for long time continuous operation, avoiding pressure fluctuation that can affect bolt accuracy.
The pump can start at any time with pressure, meaning operators do not need to bleed or reset the system between cycles.
The robust tubular frame protects the pump, motor, valve block and pressure gauge during transport and rough site handling.
Compared with comparable pumps on the market, the FBP400 pump design is reported to deliver approximately 50 percent higher speed and efficiency, while keeping noise levels low.
The FBP400 is compatible with most standard square drive and low profile hydraulic torque wrenches using twin hydraulic hoses. Common applications include:
Because it accepts three phase power ranging from 220V to 575V at both 50 Hz and 60 Hz, the FBP400 can be deployed on international job sites without a step down transformer, provided the site power supply meets the phase and voltage requirements.
Why Choose the FBP400 for Your Hydraulic Bolting System
When selecting an electric hydraulic torque wrench pump, buyers typically compare pressure rating, flow speed, safety certification, reservoir size, cooling performance and service support. The FBP400 addresses each of these requirements:
700 bar maximum pressure covers the vast majority of industrial torque wrench models.
Three stage flow reduces cycle time without sacrificing high pressure output.
EXDII CT4 certification enables safe use in explosive atmosphere environments.
15 litre aluminium tank supports continuous operation with efficient cooling.
Universal three phase input voltage adapts to global job site power.
Compact 50 kg frame with protective cage balances portability and durability.
The FBP400 anti explosion electric hydraulic torque wrench pump represents a practical balance of safety, efficiency and durability for industrial bolting operations. Its EXDII CT4 rated motor, three stage flow delivery, 700 bar output pressure and 15 litre cooled reservoir make it suitable for the most demanding oil, gas, petrochemical and heavy equipment applications. For contractors and maintenance teams that need a reliable electric hydraulic power unit capable of running for full shifts in hazardous environments, the FBP400 is a technically well matched solution.
If you would like detailed specifications, dimensional drawings or quotation information for the FBP400 pump and matching hydraulic torque wrenches, contact the manufacturer directly for current availability and site power configuration advice.

